JK Flip-Flop

From Junk Jack Wiki
Jump to: navigation, search


The JK flip-flop stores a value (whether digital or analog) according to the J and K inputs, as the output (blue).
It sets the output value on the rising edge of the main >input.

  • If J is HIGH and K is LOW the output will set to HIGH.
  • If J is LOW and K is HIGH the output will set toLOW.
  • If both J and K are HIGH the output will flip from HIGH to LOW or vice versa.
  • If both J and K are LOW the output will set to off/inactive.


  • A LOW input to the J pin, and an analog input to the K will output an elusive LOW paired with an analog value.
  • Analog inputs to both J and K pins will cause the output to toggle between those analog values each rising edge of the >input.

Can be rotated using a spanner.


See also:


Electrician's Bench Interface.png
.
Crafted Using
Electrician's Bench

.

.
I Transistor N.png
.
I Copper Wire.png
.
I Transistor N.png
.
I Copper Wire.png
.
I Refined Silicium.png
.
I Copper Wire.png
.
I Transistor P.png
.
I Copper Wire.png
.
I Transistor P.png
.
I JK Flip-Flop.png

.

.
5
Personal tools